16oz Tumblerpoxy Resin Kit

Included in kit

1-8oz bottle Part A (Resin)

1-8oz bottle Part B (Hardener) 

• Tumblerpoxy produces a 2 part epoxy resin that is manufactured in North America and has been enhanced to create high quality, crystal clear finish and long lasting results.

• Improved UV inhibitor count ensures products have enhanced resilience against yellowing from sun exposure

• Recommended Process - Tumbler - 30-35 Minutes of work time

• Measure - 1:1 Ratio
• Mix - 3 Minutes
• Bubbles - Popped with gloved or tool
• Heat - Remove remaining bubbles
• Dry - 12-18 hours before sanding and additional layering

• Recommended Process - Molds - 30-35 Minutes of work time

• Measure - 1:1 Ratio
• Mix - 3 Minutes
• Bubbles - Allow to rise to the surface for 5-8 minutes
• Alcohol Spray - Remove bubbles with alcohol spray
• Dry - 12-18 hours before removing from mold
• Dry - Additional 3-5 days on flat surface outside the mold

Please considered the above directions to ensure best results.

Notes

• Prolonged sun exposure or extreme heat not recommended
• Avoid projects with a depth greater than 1.25cm
• Store in a warm, dry location
• Liquid additives should make up less than 10% of total volume
• Reseal unused epoxy to prolong shelf life
• Bottles may be mis-formed due to the factory sealing process
• Toxic chemicals should be secured and used safely with proper PPE